Support · Quality Assurance

Performance & Testing

Every MexyTech board is validated against international standards before it ships. Below: full performance data, third-party certifications, and long-term colour-retention results — the evidence behind a 10-year outdoor warranty.

Test Results

Performance Data

Independently tested per AS 4586, EN 15534 and ASTM standards. Values below are
representative of MexyTech solid-core WPC decking.
NumItemStandardProduct ScopeResultRemarksApplication
1REACH(EC) NO. 1907/2006All WPCPassTest Harmful ContentsHazardous Substance Testing
2Pedestal Vertical Load TestEN 12825:2001Pedestal Pedestal Loading TestMechanical Test
3Fire PerformanceEN 13501fireproof wpcBf1-S1For Fire-proof productsFire-Proofing Test
4Fire PerformanceASTM E84fireproof wpcClass A – Top LevelFor Fire-proof productsFire-Proofing Test
5Pendulum TestEN15534-1:2014 and CEN/TS 15676:2007SuprotectPassSlip Resistance TestSafety Performance
6Moisture Resistance- Boiling TestEN15534-1:2014SuprotectPass Durability
7Abrasion ResistanceASTM D4060-14Suprotect37.9mg/1000r Durability
8Resistanceto Artificial WeatheringEN15534-1:2014Suprotect4.5 Grade of colorfastness2000hDurability
9Wind Resistance Test/FencePass-No failiure or disengagement9-Scale Wind LoadSafety Performance
10Moisture ContentEN322.1993All WPC0.89% Durability -Waterproof
11Falling Mass Impact ResistanceEN15534-1:2014Normal WPC9mmResidual IndentationMechanical Test
12Bending StrengthEN15534-1:2014All WPC26.8MPa Mechanical Test
13Modulus of ElasticityEN15534-1:2014All WPC3758MPa Mechanical Test
14Withdrwal Capacity of FastnersEN13446:2002All WPC4139NScrew Surface Withdrawal TestMechanical Test
15Withdrwal Capacity of FastnersEN13446:2002All WPC3370NScrew Edge Withdrawal TestMechanical Test
16Coefficient of Linear Thermal ExpansionISO 11359-2:1999All WPC66.75μm/m·℃ Material Performance
17Deflection Temperature under LoadISO 75:2013 & ISO 75-2:2013All WPC80℃ Durability
18Oxygen IndexASTM D2863-13Normal WPC21.80%Fire-ResistanceFire-Proofing Test
19Anti-Slip PropertyDIN 51130-2014SuprotectR10 Safety Performance
20Falling Mass Impact ResistanceEN15534-1:2014Suprotect0.16mmTesting the Depth of Residual IndentationMechanical Test
21Resistance to IndentationEN15534-1:2014SuprotectBrinell Hardness: 65N/mm2             Rate of Elestic Recovery:77.7% Durability
22Rockwell HardnessASTM D785-08Suprotect83.3RSurface HardnessDurability
23Coefficient of Linear Thermal ExpansionEN15534-1:2014Hyper Wood38.6 Material Performance
24Bending StrengthEN15534-1:2014Hyper Wood46MPa Mechanical Test
25Modulus of ElasticityEN15534-1:2014Hyper Wood4300MPa Mechanical Test
26Flexural Breaking LoadGB/T 24508-2009All WPC4091NPassMechanical Test
27Falling Mass Impact ResistanceGB/T 24508-2009All WPC6-7mmPassMechanical Test
28DensityGB/T 24508-2009All WPC1.22PassMaterial Performance
29Water Absorption RateGB/T 24508-2009All WPC0.90%PassMaterial Performance
30Falling Ball Impact Test at Low TemperatureGB/T 24508-2009All WPC-10℃ No CrackPassMechanical Test
31Dimension Changing Ratio of Swelling after Immersion in WaterGB/T 24508-2009All WPC<0.1PassMaterial Performance
32Dimension Changing Ratio ager HeatedGB/T 24508-2009All WPC0.20%PassMaterial Performance
33Thermal-Cold Cycliing ResistanceGB/T 24508-2009All WPCNo Cracking No Bubble 0.2PassDurability
34Stain Resistance of SurfaceGB/T 24508-2009All WPCNo Significant ChangePassDurability
35Free-Thaw ResistanceGB/T 24508-2009All WPC94%PassDurability
36Creep Recovery RatioGB/T 24508-2009All WPC83%PassMechanical Test
37Slip ResistanceGB/T 24508-2009All WPC45PassSafety Performance
38Formaldehyde EmissionGB/T 24508-2009All WPCE0-lowest levelPassSafety Performance
39Dissoluble LeadGB/T 24508-2009All WPC<0.5PassSafety Performance
40Dissoluble CadmiumGB/T 24508-2009All WPC<0.5PassSafety Performance

Compliance

Certifications & Test Reports

Certified to the standards your projects and specifiers require. Full PDF reports available on request.

ISO 9001

Quality Management

ISO 9001

Quality Management

ISO 9001

Quality Management

ISO 9001

Quality Management

ISO 9001

Quality Management

ISO 9001

Quality Management

ISO 9001

Quality Management

ISO 9001

Quality Management

Colour Retention

Colour Fading Test

MexyTech WPC products with the first class anti UV and weather-resistant pigments. During the initial period.
The colour will fade slightly, but it will tend towards stability within a few weeks,
after then the colour will be natural and in harmony with the environment.

Standard WPC — after 2000h

Visible greying and colour shift under prolonged UV exposure. Surface loses depth and warmth.

MexyTech Surlyn-capped — after 2000h

Colour and grain remain stable. Grey scale rating 4.5, well within specification for outdoor use.

4.5

Grey scale rating @ 2000h (EN 15534)

3000h

QUV accelerated weathering tested

10 yr

Structural outdoor warranty

Need the full test reports for
your specification?

We provide complete third-party PDF documentation for architects, specifiers and distributors.

Request Test Reports